![Tedan PRAKTIK MB 100 Скачать руководство пользователя страница 10](http://html1.mh-extra.com/html/tedan/praktik-mb-100/praktik-mb-100_installation-use-and-care-manual_1073273010.webp)
10
EN
For water heater types with external regulation, by simple turning the button desired
water heating temperature can be set within the range 20 to 70±5°C. When desired/ set
temperature is reached inside the the tank the thermoregulator will cut the power circuit
automatically, and the signal lamp which has been on during the heating time,
will go off.
WARNING
: before using hot water from water heater turn it off from elecrical power
supply.
Water heaters also have thermometers with metal cap and bimetal showing the temperature
of the water. If water heater will not be used for longer period it is recomanded to disconnect
it from power supply line. If water inside the water heater could freeze while not used it
is recomanded to empty the tank. The miantenance tips should be respected, especially
check-up for how much Mg anode is consumed, at least every 36 months, and replace it if
needed. The limestone sediment should be removed regularly.
For such interventions tank must be emptied.
To empty the tank please proceed as follows:
- Disconnect the water heater from power supply
- Close the inlet cold water valve
- Open the hot water pipe
- Unscrew the safety valve mounted on the cold water inlet, and wait
for water to go out.
After that the unscrew the nut of the heater counterflange, take out the flange with the heater,
remove the limescale and replace Mganode. If you use chemical products for limescale
removal, they must not come into contact with Mg-anode (anode should be taken out).
Afterwards the tank should be rinsed and refilled with water.
WASTE DISPOSAL – WHAT AFTER YOUR WATER HEATER IS
NO MORE USABLE
The accumulation water heaters and the packing are made of recyclable
materials. After your water heater is not usable any more, it is forbidden
to dispose it as non-selected waste. For waste disposal, the water heater
plactic and rubber parts should be separated from metal parts, classified
and left for recycling or
final disposal according to loacal regulations.Only by waste separation and
management you will protect the environment.