Tecsis P3307, Руководство по эксплуатации

Страница: 20 / 48

BD_BE_BF_BSP 709 a
0 Betriebsanleitung/Operating instructions/Mode d'emploi/Instrucciones de servicio
Specifications Model P3307
Temperature coefficients within
rated temp range
Mean TC of zero

% of span typ.
≤
0.5 / 10 K
Mean TC of range

% of span ≤ 0.3 / 10 K
CE- conformitiy
EMC directive

004/108/EC, EN 61 36 Emission (Group 1, Class B) and
Immunity (industrial locations)
Wiring protection
Short-circuit proofness

S+ towards 0V
Reverse polarity protection

UB towards 0V
Overvoltage protection

VDC 36
Weight kg Approx. 0.08
7. Starting, operation
GB
{ } Items in curved brackets are optional extras for additional price.
Functional test
Open pressure connections only after the system is without pressure!
Observe the ambient and working conditions outlined in section 7 „Technical
data".
Please make sure that the pressure sensors is only used within the overload
threshold limit at all times!



When touching the pressure sensors, keep in mind that the surfaces of the
instrument components might get hot during operation.
When designing your plant, take into account that the stated values (e.g. burst pressure,
over pressure safety) apply depending on the material, thread and sealing element used.
The output signal must be proportional to the pressure. If not, this might point to a
damage of the diaphragm. In that case refer to chapter 9 „Troubleshooting“.
Warning
Caution