Tecsis F9304, Руководство по эксплуатации, Страница: 20 / 28

Betriebsanleitung/Operating manual F9304
20 BD_BE 9005 a www.tecsis.de
6 Mechanical installation conditions of load cell
6.1 Precautions to take during assembly
•
Force measuring equipment is extremely sensitive and must be
handled carefully.
•
Overloading must be prevented at all times.
•
The output signal is noted on the name plate (Fig. 1). This output
signal is a guide value. The output signal depends on the cable
diameter and whose characteristics.
•
The connection assignments are also noted on the name plate and
can also be found in the section entitled “Electrical connection”. The
polarity must be correct at all times.
Fig. 1: Name plate – 1 x connecting plug – standard output signal
Type Series
Signal
Auxiliary energy
S# serial number
UB+/ S+ Connector configuration – /
0V/S- Connector configuration – Supply - / Signal –