Tecsis F9304, Руководство по эксплуатации, Страница: 16 / 28

Betriebsanleitung/Operating manual F9304
16 BD_BE_9005 www.tecsis.de
1 Safety note
1.1 Use for intended purpose
The load cells in model series F9304 are intended for the
measurement of static tension force on existing rope constructions.
These devices have been constructed and tested in accordance to the
safety regulations for electronic measuring equipment. Any other
usage is deemed to be
incorrect . The load cells can only be
guaranteed to operate correctly and safely if the information in the
operating instructions is complied with. The legal and safety
regulations that apply to the respective application must also be
observed during use (e.g. VDE 0100). This also applies to the use of
accessories. The load cell is not intended to be used a as safety
element. The correct and safe operation of this load cell depends on
correct transportation and proper storage, installation and assembly
and careful operation and maintenance.
1.2 General dangers if the safety instructions are not followed
Load cells made by tecsis are manufactured in accordance to the
latest state of technology and are safe during operation. However, the
load cells can be the source of residual danger if they are used or
operated improperly. Any person who is entrusted to install, start up,
maintain or repair a load cell must have read and understood the
operating instructions, particularly the technical safety instructions.
1.3 Residual dangers
The performance and scope of delivery of the load cell only covers a
sub-area of force measuring technology. The technical safety aspects
of force measuring technology must also be planned and implemented
by the system planner / equipper / operator in such a way that residual
dangers are minimised. The existing regulations must be complied
with. Residual dangers associated with force measuring technology
must be pointed out.
GB