Tecsis E3906, Руководство по эксплуатации

Страница: 16 / 20

Bedienungsanleitung/Operating manual
E3906
Presettings for sensitiv ity w ith S1 and S2 Decimal point settings w ith S3 and S4
mV/V
100%
Anzeige
S1 S2 S 3 S4 Anzeige
0,35 – 2,1 2000 open closed open open 1888,8
2,0 – 3,5 2000 open open closed open 188,88
0,35 –
0,55
5000 closed closed open closed 18,888
0,5 – 0,9 5000 closed open closed closed 18888
0,88 – 3,5 5000 open closed
0,35 – 1,1 10000 closed closed
1,0 – 1,82 10000 closed open
1,75 – 3,5 10000 open closed
0,35 – 2,2 19999 closed closed
2,0 – 3,5 19999 closed open
Sensor connection: Type: 15pol. SUB-D HD (High Density)
Pin 1
excitation - Pin 11
Pin 8 exci Pin 12 signal -
Pin 10 control Pin 13 shield
Example 1 of calibration: w ith calibration control
Torque sensor 50 Nm, 2 mV/V.
Display at 100% = 50,00, in this case decimal point setting: S3 closed, S4 open.
Presetting for 5000 and 2 mV/V, S1 is open and S2 is closed.
Then adjust zero-potentiometer = 0 at unloaded sensor.
Press control and adjust 50,00 with amplification potentiometer.
Example 2 of calibration: w ith nominal load (100%) and w ithout calibration control
Force sensor 10N, 1mV/V.
Display at 100% = 10,000, in this case decimal point setting: S3 open, S4 closed.
Presetting for 10000 and 1mV/V, S1 is open and S2 is closed.
Then adjust with zero-potentiometer = 0 at unloaded sensor.
Apply nominal load(100%) and adjust 10,000 with amplification potentiometer.
Example 3 of calibration: w ith e.g. 123kg part load and w ithout calibration
Force sensor 200kg, 1,6mV/V.
Display at 100% = 199,99, in this case decimal point setting: S3closed, S4open (high
resolution). Presetting for 19999 and 1,6 mV/V, S1 and S2 are closed.
200,0 so decimal point setting: S3 open, S4 open (can measure more than 200kg).
Presetting for 2000 and 1,6 mV/V S1 is open and S2 is closed.
Then adjust with zero-potentiometer = 0 at unloaded sensor.
Apply 123 kg load and adj ust 123,00 (123,0) w ith amplification potentiometer.
16 BD_BE 949 b www.tecsis.de