P. 11
| Tecshow Navigator 3+
English version
14. EDITING CHASES
Add A Chase Step
1. Press and hold down the Program button for
approximately 2 seconds or until the PROG
indicator in the LED display flashes. Once the
indicator is flashing, record mode is engaged
and you may release the program button.
2. Select the Chase # button, 1-12, that you wish
to add a step to. The relevant Chase LED should
illuminate.
3. Press the Tap/Disp button, the Step indicator
light should illuminate in the LED display.
4. Press the Bank UP/DOWN buttons to manually
step through the chase steps. Find the chase
step that you wish to add a step after.
5.
Press the Tap/Disp button disengage Step
mode. The Step indicator, in the LED display,
should be OFF.
6. Using the BANK UP & DOWN buttons, select the
scene bank, 1-30, that contains the scene you
want to add. You can view the scene banks in
the LED display by referring to the furthest two
digits to the right.
7. Press the MIDI/REC button to record the step
into you chase. All LEDs should flash three times
to confirm that the chase step was added.
indicator is flashing, record mode is engaged
and you may release the program button.
2. Select a Chase # button, 1-12, that you wish
to record to. The relevant Chase LED should
illuminate.
3. Using the BANK UP & DOWN buttons, select the
scene bank, 1-30, that you want added to your
chase. You can view the scene banks in the LED
display by referring to the furthest two digits to
the right.
4. Simultaneously press the Music/Bkc and Midi/
8. Repeat steps 3 through 7 to add additional
chase steps.
9. Press and hold down the Program button for
approximately 2 seconds to exit. A flashing
Blackout indicator, in the LED display, is indica-
tive that you are out of program mode.
Deleting Chase Steps
1. Press and hold down the Program button for
approximately 2 seconds or until the PROG
indicator in the LED display flashes. Once the
indicator is flashing, record mode is engaged
and you may release the Program button.
2. Select the Chase # button, 1-12, that you want
to delete a step in. The relevant chase LED
should illuminate
3. Press the Tap/Disp button, the Step indicator
light should illuminate in the LED display.
4. Press the Bank UP/DOWN buttons to manually
step through the chase steps. Find the chase
step that you want to delete.
5.
Press the Auto/Del button to delete the chase
step. All LED´s should flash three times to con
-
firm that the chase step was deleted.
6.
Repeat steps 4 & 5 to delete additional chase
steps.
Rec buttons to record the entire scene bank. All
LED´s will flash three times to confirm that the
scene bank was recorded. Scenes will record in
the exact same sequence as stored in the bank.
5.
Repeat steps 3 & 4 to record additional scene
banks.
6. Once you’ve recorded all of your steps, press
and hold down the Program button for approx
-
imately 2 seconds to exit. Aflashing Blackout
indicator, in the LED display, is indicative that
you are out of program mode.
