Tecra M1, Руководство пользователя

Страница: 106 / 218

ENGLISH using TecraM1online.dot –– Printed on 24.02.2003 as 02_200UK
Power and Power-Up Modes
6-10
Tecra M1
Monitoring battery capacity
Remaining battery power can be monitored in the Power Save Modes
window in Power Saver.
1. Wait at least 16 seconds after turning on the computer before trying to
monitor the remaining operating time. The computer needs this time to
check the battery’s remaining capacity and to calculate the remaining
operating time, based on the current power consumption rate and
remaining battery capacity. The actual remaining operating time may
differ slightly from the calculated time.
2. With repeated discharges and recharges, the battery’s capacity will
gradually decrease. Therefore, an often used, older battery will not
operate for as long as a new battery even when both are fully charged.
In this case, Power Save Modes window in TOSHIBA Power Saver will
indicate a 100% charge for both the old and new battery, but the
displayed estimated time remaining will be shorter for the older
battery.
Maximizing battery operating time
A battery’s usefulness depends on how long it can supply power on a
single charge.
How long the charge lasts in a battery depends on:
■
How you configure the computer (for example, whether you enable
battery-power saving options). The computer provides a battery save
mode, which can be set in TOSHIBA Power Saver, to conserve battery
power. This mode has the following options:
■
Processor speed
■
Monitor brightness
■
System standby
■
System hibernation
■
Turn off monitor
■
Turn off hard disks
■
How often and how long you use the hard disk, optical disc and the
diskette drive.
■
How much charge the battery contained to begin with.
■
How you use optional devices, such as a PC card, to which the
battery supplies power.
■
Enabling Standby mode conserves battery power if you are frequently
turning the computer off and on.
■
Where you store your programs and data.
■
Closing the display when you are not using the keyboard saves power.
■
Operating time decreases at low temperatures.
■
The condition of the battery terminals. Make sure the battery terminals
stay clean by wiping them with a clean dry cloth before installing the
battery pack.