TECO TWS-TSO26HFFT Скачать руководство пользователя страница 4

2

 CAUTION

Turn off the air conditioner and disconnect the power if you are not going to use it for a long time.

Turn off and unplug the unit during storms.

Make sure that water condensation can drain unhindered from the unit.

Do not

 

operate the air conditioner with wet hands. This may cause electric shock.

Do not

 

use device for any other purpose than its intended use.

Do not

 climb onto or place objects on top of the outdoor unit.

Do not

 

allow the air conditioner to operate for long periods of time with doors or windows open, or

if the humidity is very high.

ELECTRICAL WARNINGS

Only use the specified power cord. If the power cord is damaged, it must be replaced by the

 

manufacturer

, its service agent or similarly qualified persons in order to avoid a hazard.

Keep power plug clean. Remove any dust or grime that accumulates on or around the plug. Dirty

 

plugs can cause fire or electric shock.

Do not 

pull power cord to unplug unit. Hold the plug firmly and pull it from the outlet. Pulling directly

 

on the cord can damage it, which can lead to fire or electric shock.

Do not 

modify the length of the power supply cord or use an extension cord to power the unit.

Do not 

share the electrical outlet with other appliances. Improper or insufficient power supply can

 

cause fire or electrical shock.

The product must be properly grounded at the time of installation, or electrical shock may occur.

For all electrical work, follow all local and national wiring standards, regulations, and the Installation

 

Manual.  Connect cables tightly, and clamp them securely to prevent external forces from damaging

 

the terminal. Improper electrical connections can overheat and cause fire, and may also cause

 

shock. All electrical connections must be made according to the Electrical Connection Diagram

 

located on the panels of the indoor and outdoor units.

All wiring must be properly arranged to ensure that the control board cover can close properly. If the

 

control board cover is not closed properly, it can lead to corrosion and cause the connection points

 

on the terminal to heat up, catch fire, or cause electrical shock.

All

 wiring and disconnection

 

must be incorporated in the fixed wiring in accordance with the wiring 

rules.

Disposal Guidelines

This marking shown on the product or its literature, indicates that waste electrical and 

eletrical equipment should not be mixed with general household waste.

Young children should be supervised to ensure that they do not play with

the appliance and packaging.

Packing (e.g. wraps, polystyrene etc.) can be dangerous for children. There

is a risk of suffocation. Keep packaging materials away from children.

Contact your local authorities for correct method of disposal. Dispose of all

packaging in a responsible manner in accordance with local regulations.

Содержание TWS-TSO26HFFT





















Отзывы: