10
TANK
C H I L L E R L I N E
1.5.3 Information on the display
“Green light”
On:
unit in cooling mode
“Red light”
On:
unit in heating mode
“Green light”
Flashing light:
unit ready for cooling
“Red light”
Flashing light:
unit ready for heating
1.5.4 Thermostat settings
Refer to
fi
gure 15 for buttons detection.
1) To change the temperature of the water:
a. Press the SET key, the value currently set is displayed. The value starts blinking
b. Change the value by using the
and
keys
c. Press the SET key to con
fi
rm the set value or wait 5 seconds, the value is stored
2) Changing the hysteresis value of operation
a. Press for 10 seconds the SET key
b. On the display will appear the hysteresis value currently set. The value will start blinking. It is advis-
able not to change this value
c. Change the value by using the
and
keys
d. Press the SET key to con
fi
rm the set value or wait 5 seconds, the value is stored
3) Adjustment of the temperature viewed on the display
In the event that the temperature viewed on the display is di
ff
erent than that taken inside the aquarium,
proceed as follows:
a. Press for 10 seconds the SET key
b. On the display will appear the hysteresis value currently set. The value will start blinking
c. Press once again the SET key
d. On the display will appear the value of the temperature currently read by the probe. The value will
start blinking
e. Change the value by using the
and
keys
f. Press the SET key to con
fi
rm the set value or by waiting 5 seconds, the value is stored
4) Change of the unit of measurement of the temperature viewed on the display
a. Press simultaneously the
and
keys
b. On the display will appear the writing C - F (from Celsius degrees to Fahrenheit degrees) or F - C
(from Fahrenheit degrees to Celsius degrees). The temperature will be displayed with the new unit
of measurement
1.6 TRANSPORTATION AND STORAGE
The conditioner must be handled carefully in a vertical position using the handles. It is recommended to
placed it on a
fl
at surface.
1.7 DEMOLITION AND DISPOSAL
The crossed-out wheelie bin label that can be found on your products, indicates that the product may
not be treated as household waste. By ensuring that this product is disposed of correctly, you will
help preventing potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of these products. For more detailed
information about recycling of this product, please contact your local city o
ffi
ce, your household waste dis-
posal or the dealer where you purchased this product. This information only applies to customers in the
European Union, according to Directive of EUROPEAN PARLIAMENT on waste electrical and electronic
equipment (WEEE) and legislation transposing and implementing it info the various notional legal systems.
For other countries, please contact your local government to investigate the possibility of recycling your
product.
EN
Содержание TK 9000
