Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
INTRODUCTION
This manual includes the technical description, operation, installation and assembly instructions,
technical data for the intake extractor unit with energy regeneration “PICO HP2”, “PICO RECO
100”, hereinafter referred to as recovery unit.
SAFETY REQUIREMENTS
Read the user manual carefully before use and installation of heat reversible recovery unit with
individual chamber with energy regeneration.
The installation and the operation of the recovery unit must be carried out in compliance with the
user manual, as well as with applicable legislations, local and national laws and technical and
electrical regulations. The warnings, contained in the user manual, should be heeded, as they
contain vital information for personal safety.
Failure to follow the safety rules can result in damage to the recovery unit. Read this
manual carefully and keep it for as long as the recovery unit is used.
Legend of symbols used in the manual:
THE RECOVERY UNIT WAS NOT DESIGNED FOR USE BY CHILDREN, PERSONS WITH
PHYSICAL OR MENTAL DISABILITIES, PERSONS WITH SENSORY DISABILITIES, OR
PERSONS WITHOUT ADEQUATE QUALIFICATIONS.
THE INSTALLATION AND CONNECTION OPERATIONS CAN BE PERFORMED ONLY BY
QUALIFIED PERSONNEL AFTER FOLLOWING THE ADEQUATE SAFETY TRAINING.
UNATTENDED CHILDREN SHOULD NOT BE ALLOWED ACCESS TO THE SITES WHERE THE
FAN IS INSTALLED.
USE OF THE RECOVERY UNIT
The recovery unit was designed to ensure the air exchange in apartments, holiday farms, hotels,
bars and, in general, domestic and public places.
The recovery unit is fitted with a ceramic exchanger which allows the air recirculation thanks to
the energy regeneration with the heat from the intake air.
The recovery unit was designed to be installed in premises on walls with a thickness between 310 mm
and 500 mm (optional tube L=1,500 mm), for the “Pico Reco 100”, the minimum thickness is 370 mm.
The recovery unit was tested for continuous operation connected always to be mains supply.
The transported air must not contain flammable or explosive mixtures, chemical substance
vapours, large dust particles, soot and oil particles, dangerous substances, fibrous
materials, pathogenic agents or other harmful substances.
MAIN TECHNICAL PARAMETERS
The recovery unit was designed for application within premises with a room
temperature varying
from -20°C to +50°C and relative humidity of up to 80%.
WARNING
PROHIBITION
02
