Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
1) Install the duct in the wall, with a 1° inclination towards the outside. The air duct must
Be flush with the internal wall and should protrude from the external wall for 5 mm (only PICO
RECO 100 model).
Prepare a circular hole positioned as shown in the
adjacent figure
5 mm
1°
Ø 103-128-153 - 204
MOUNTING RECOVERY UNITS “PICO HP2 / PICO RECO 100”
2) Prepare the power cable (see pic.1) taking care to route it, either from
the right or left, in the upper part of the duct in correspondence with the duct hole.
The mains can be laid out by means of a buried electrical sheath or an adequate electrical
channel which will contain the power cord.
The cord complete with plug must protrude from the wall for approximately 10 cm.
3) Insert the circular duct in the hole made in the wall. Fill the spaces between the wall and the
duct with silicone, foam or other suitable material. The air duct must be placed wired to the
internal wall.
pic.1
A
B
C
INSIDE
OUTSIDE
LEGEND:
A: Circular wall duct
B: Wall mount fastening ring
C: Through holes for
power supply
16
