Tecnosystemi 12450014R2, Руководство пользователя

Страница: 14 / 18

14
AIR CURTAIN OPERATING MODES SETTINGS WITH “AUTOMATIC START KIT” (optional)
Connect the sensor with cable to the air curtain by means of a jack and attach magnetic sensor A to the door casing or
in any case to something firmly secured to the frame. Attach the second sensor to the moving part of the door leaving no
more than 2 cm between the two sensors.
When the “automatic start kit” is installed, the air curtain can have two different operating modes.
MODE 1
The air curtain works at maximum speed only, completely excluding the use of the remote control and of the heating
elements.
Example. Door closed, air curtain in stand-by (no speed and heating element active).
When the door is opened, the speed reaches the maximum value and the heating element remains deactivated. When the
door is closed, the air curtain goes back in stand-by.
To activate this operating mode, proceed as follows:
1. Press the ON button
2. Disconnect the jack
3. Press the ON button
4. The orange LED will turn on
5. Press the ON button
6. The orange LED will turn off
7. Reconnect the jack
Note: the air curtain is delivered, as standard, with mode 1 active
.
MODE 2
In this mode it is possible to select, using the remote control, both the operation of the speeds and of the heating elements.
Example. Select the minimum speed and the heating element.
When the door is opened, the speed reaches the maximum value and the heating element remains active. When the door
is closed, the air curtain goes back to the minimum speed with the heating element active. To activate this operating mode,
proceed as follows:
1. Press the ON button
2. Disconnect the jack
3. Press the ON button
4. The orange LED will turn on
5. Reconnect the jack