10 of 20
II_Pulse_12_eng
Installation instructions
Pulse
Remove the release liner placed under the membrane and apply
the latter on the keypad case.
Connect a battery to the battery connector inside the keypad
battery compartment or, if provided, connect the battery pack
to the lock connector "2/BAT".
Fixed keypad installation instructions
Insert the keypad cable inside the hole on the safe door and connect it to the lock connector
"1/ENT".
Lift the keypad membrane and, making sure that the connection cable and the battery cable are
not damaged by the keypad case, fix the screws to the relative threaded holes on the safe door.
Remove the release liner placed under the membrane and apply the latter on the keypad case.
Connect a battery to the battery connector inside the keypad battery compartment or, if
provided, connect the battery pack to the lock connector "2/BAT".
SwingBolt lock installation instructions
The SwingBolt lock is a swinging bolt lock whose block is carried out by a motor; it can be
installed in all 4 directions, even upside down.
By entering a valid code, the lock electronic removes the blocking for 3 seconds and the
boltwork can be moved into open position by pushing the bolt inside the lock case.
The bolt automatically secures when the safe handle, or the safe door mechanism, is brought
to the locked position.
If the SwingBolt lock is used in conjunction with other locks, the safe door mechanism must
ensure the closure of the SwingBolt before the other locks.
The lock can be mounted in all four mounting directions (RH, LH, VU, VD).
Furthermore, by flipping over the lock, both locking directions can be realized.
