Instructions manual the motorized wall-mounted hose reel
6
15/09/2021 Rev:1.1.0
(LINGUA ORIGINALE)
3 SAFETY FEATURES
It is recommended to read carefully all the installation, use and maintenance instructions detai-
led in this manual.
Furthermore, the following WARNINGS should always be observed:
• Never use the machine for unauthorized purposes.
• Keep children away from the vacuum cleaner whilst in function. Children should not play with the ma-
chine nor with the suction sockets.
• This equipment should not be used by persons (including children) with reduced psychic, sensory or
mental capacities or by persons with no experience nor knowledge of the system, unless they are
under the guidance or instructed to use the machine by persons responsible for their safety.
• Wear protective gloves and mask to carry out maintenance interventions
• Only use original spare parts and accessories
• Do not vacuum clean fabrics, heavy materials, ashes or hot embers.
• Never vacuum clean liquids.
• No part of the body should come into contact with the suction accessories.
• Do not vacuum powder such as concrete, lime wastes, plaster dust, etc.
• Do not leave the hose reel working when you don’t use it.
• Do not leave the hose when you rewind it, but follow it through while it rewinds on the wheel during the
closing.
• Do not pull the hose down hard, neither when it winds up nor when it unwinds.
Finally, remind that pictograms or danger and warning signals can be found on those parts of the
equipment where, if not strictly followed, potential risky situations may occur.
WARNING:
The manufacturer declines any form of responsibility or guarantee if the purchaser,
or anyone in his stead, makes even the slightest modifi cation or adjustment to the purchased product.
All materials and components used to manufacture this product comply with CE safety regulations. All
relevant certifi cations are held at the manufacturer headquarters.
3.1 Declaration of absence of dangerous substances
The manufacturer declares that its products and appliances have been manufactured with materials
which comply with the restrictions established by the health and environment protection regulations in
force and do not contain SVHC-classifi ed substances (Substance of Very High Concern) in compliance
with CE regulation 1907/2006 (REACH: i.e. Registration, Evaluation, Authorization and Restriction of
Chemical Substances). Although these substances have not been used during the processing cycles of
raw materials and during the manufacturing cycles of our products, their presence in p.p.m. (parts per
million) cannot be completely excluded due to micro-pollution of raw materials.
3.2 Identifi cation plate
The CE identifi cation plate is assembled on the side of the connection to the pipe network. This should
not be removed or damaged.
Содержание 7041.51E
Страница 1: ...w w w s i s t e m a i r c o m TECHNICAL MANUAL CENTRAL VACUUM SYSTEMS ByTecnoplus s r l ROLL Flex ...
Страница 2: ......
Страница 9: ...9 2 15 09 2021 Rev 1 1 0 LINGUA ORIGINALE English 7 1 Connection to the pipe network ...
Страница 19: ......