TECNOPLUS 7041.51E, Техническое руководство, Страница: 16 / 20

Instructions manual the motorized wall-mounted hose reel
16
15/09/2021 Rev:1.1.0 (LINGUA ORIGINALE)
9 MODIFICATION TO THE WINDING HOSE ENDSTOP
If it is necessary to modify the limit switch which regulates the roll operaions of the hose on the Mo-
torized wall-mounted hose reel device, the number of winding turns can be changed by acting on the
switch positioned under the closing casing (see fi gure below)
1 2 3 4
OFF
ON
5
Completely unwind the hose until it stops automatically, using the right rope of the device.
Acting on the left rope, wind the hose to the desired length and stop the rotation of the device.
Raise switch 1 to the ON position and reposition it in the OFF position ,
at this point the hose rolling limit switch has been changed from the factory settings.
To check that the operation was successful, completely unwind the hose until it stops automatically
and roll up it: it will automatically stop at the selected length.
1 2 3 4
OFF
ON
5 1 2 3 4
OFF
ON
5
9.1 MODIFICATION OF ROLL UP / DOWN OPERATION
If necessary, it is possible to change the type of control of the winding / unwinding of the tube.
The standard functionality includes two types of command:
Step by step
Automatic
The step-by-step function works in this way: when the roll up or roll down button is pressed conti-
nuously, the rotation of the device stops when it is released.
The continuous function consists of a quick press of the roll up or roll down button: in this case the