TECNOEKA KF 981 EV, Инструкция по эксплуатации и руководство пользователя

Страница: 26 / 29

_ TECNOEKA Srl __________________________________________________________ use and instruction manual _
_ page 26 _________________________________________________________________________________________
Type of fault
Type of fault Type of fault
Type of fault Cause
Cause Cause
Cause Corrective action
Corrective action Corrective action
Corrective action
- One of the motors is blocked or turns
slowly
- Contact a qualified technician to
repair the motor
- The motors do not go into reverse
- Contact a qualified technician to
repair the motor
The oven does not
cook evenly
- Heating element not powered or is
damaged
- Contact a qualified technician to
repair the element
- Damaged lamp - Change the lamp
Lighting lamp in the
cooking chamber
does not work - Damaged lamp feeder
- Contact a qualified technician to
repair the feeder
- Break in the connection between the
cooking chamber probe – electronic
(power) card
- Check the connection to the
electronic card
The wording “Er1”
“Er1” “Er1”
“Er1”
appears on the
temperature display
- Damaged cooking chamber probe
- Contact a qualified technician to
repair the probe
Type of fault
Type of fault Type of fault
Type of fault
Cause
Cause Cause
Cause Corrective action
Corrective action Corrective action
Corrective action
- Cooling motor fan damaged
- Contact a qualified engineer to
repair it
- Aeration openings present in the
metal walls blocked
- Unblock the openings
“Er3” “Er3” “Er3” “Er3”is displayed on the
temperature display and
an alarm is activated
that can be silenced by
pressing the button.
Cooking can continue
but it is necessary to
remove the cause of the
fault causing the
electronic board to
overheat.
- Heat sources too near the oven - Eliminate the heat sources
- Cooling motor fan damaged
- Contact a qualified engineer to
repair it
- Aeration openings present in the
metal walls blocked
- Unblock the openings
“Hot”
“Hot” “Hot”
“Hot” flashes on the
temperature display.
The oven stops
automatically and the
alarm is activated for 30
seconds.
The oven can be
restarted only when
the electronic board has
completely cooled down
- Heat sources too near the oven - Eliminate the heat sources
- Break in the connection between
the core probe – electronic (power)
card
- Check the connection to the
electronic card
Core temperature
activated and probe
connected to the control
panel: the message
“ “ “ “---- ---- ---- “ “ “ “ appears on the
temperature display
- Damaged core needle probe
- Contact a qualified technician to
repair the probe