Pag. 22 di 29
The heater exclusively works with bioethanol. The burning is regulated by the rod (C).
The bioethanol feeding take place as follows:
WARNING
: FILL ONLY WHEN THE STOVE IS OFF AND
COLD.
IF THE HEATER IS TURNED OFF BY IT SELF BECAUSE
THE BIOETHANOL IS FINISHED, ALWAYS CLOSE THE
TANK WITH THE REGULATION ROD ( C ) AND MAKE
SURE THE FLAME IS COMPLETELY OFF BEFORE TO
REFILL THE STOVE.
WARNING
: THE FIBER PLACED INSIDE THE BURNER
WILL ABSORB THE BIOETHANOL ARMED, TO
GUARANTEE MORE SAFETY FOR THE STOVE.
PROCEED TO FILL THE BIOETHANOL IN A GRADUAL
WAY TO ENSURE WITHOUT OVERFLOOD THE
REGULAR ABSORBING, AND IN CASE REMOVE THE
OVERFLOWING IMMEDIATELY
Ensure that the regulation rod (c) is fully inside and
open the glass door.
Pull the regulation rod to open the fuel tank.
With an insufficient quantity of bioethanol, the
stove may not burn or be lighted
Pour the bioethanol into the burner without making
it overflow
(the maximum is 1.5 liters).
In the tank there are triangles indicating the
maximum fill line.
Fill the stove with the burner inlaid
USE OF THE SIPHON PUMP
A- Opening for the ignition
B- Glass Door
C- Regulation rod
D- Essence container
Beware possible
overflowed fuel
Be careful not to
exceed the line
under MAX
4. INSTALLATION