11
DESCRIPTION
: the projection/display shows “Hi.4”.
PROBLEM
: the room temperature is too high (above 45,0°C/113.0°F).
SOLUTION
: move to another, cooler site and, if you are taking the body
temperature, wait for the stabilization of the device and of the subject.
DESCRIPTION
: the projection/display shows «Lo.5»
and the value alternately.
PROBLEM
:
- reading with “face”
button: the room temperature is
between 10,0 and 15,9°C (50.0 and 60.6ºF).
- reading with “home”
button: the room temperature
is between 5 and 9,9°C (41 and 48.2ºF).
SOLUTION
: the temperature reading can be taken but
accuracy is not guaranteed.
DESCRIPTION
: the projection/display shows “Lo.5”.
PROBLEM
: the room temperature is too low (below 10,0°C/50.0°F
if you’ve pressed the “face”
button or below 5,0°C/41.0°F if you’ve
pressed the “home”
button).
SOLUTION
: move to another, warmer room and, if you are taking the body
temperature, wait for the stabilization of the device and of the subject
Messages about the detected temperature
DESCRIPTION:
the projection/display shows «Hi.2»
and the value alternately when you press the “face”
button.
MEANING:
ATTENTION! The temperature is
40,0°C/104.0°F or more
.
DESCRIPTION
: the projection/display reads “Hi.2”.
PROBLEM
:
- reading with “face”
button: the temperature detected exceeds the
limit for operation with this button (>43,0°C / >109.4ºF).
- reading with “home”
button: the temperature detected exceeds the
limit for unit operation (>80,0°C / >176.0°F).
SOLUTION
:
- reading with “face”
button: please make certain that you’ve pressed
the correct button, with regard to the measured object, and that the war-
nings have been met.
- Reading with “home”
button: the temperature reading cannot be
taken.
