www.tecnikchargers.com
www.tecnikchargers.com
13
13
AUTOMATIC CHARGE TERMINATION
When the charge is complete, the charger shuts down, and the display shows the scrolling message “End ELAPSEd x.x h”.
The time indicated by the display is the time elapsed after the charge has been terminated. This indication is useful when
there are two or more forklift operated with FIFO (First In First Out) rotation: when the user picks up a forklift, he will always
chose the one with highest he time elapsed after charge termination.
The nal values of Voltage/cell, time of charge and capacity charged remain stored in memory.
If the red STOP pushbutton is pressed, the display will show these values in sequence.
AUTOMATIC SHUTDOWN ON BATTERY DISCONNECTION
NEVER disconnect the battery while it's being charged.
Disconnecting the battery while it's being charged is hazardous
DANGER!
If the battery is disconnected while the charge is in progress, the
TRONIK
charger switches off automatically.
MANUAL CHARGE TERMINATION
While the charge is in progress, it's possible to shut down the charger by pressing the
red button “MANUAL STOP” on the front panel. The display will show the message:
“StOP”.
The nal values of Voltage/cell, Time of charge and Capacity Charged remain stored
in memory. If the “MANUAL STOP” button is pressed again, these values will be
displayed in sequence. When the charge is terminated manually, the equalization
and refresh functions are automatically disabled.
USING THE CHARGER
