www.tecnikchargers.com
www.tecnikchargers.com
10
10
BATTERY CONNECTION AND AUTOSTART
TRONIK chargers are programmed to execute a complete cycle of charge automatically, however it’s recommended
to survey the operations when the battery remains connected to the charger for more than 12 hours.
ATTENTION!
Connect the battery to the charger, using an adequate plug. When the battery is
correctly connected, the display turns on and shows the battery voltage. If the battery
voltage lower than the minimum threshold of 1,62 V/cell, the charger doesn't start,
and the display will show the error message “V LO” (voltage low):
If the battery voltage is higher than the maximum off charge threshold of 2,60 V/cell,
the charger doesn't start, and the display will show the (ashing) error message “V hI”
(voltage hi):
If the voltage of the battery is between the minimum and maximum thresholds, the
charger will wait for three 3 seconds before to start charging, while the display will
show the programmed gassing voltage:
If, during the charge, the voltage of the battery exceeds the maximum charging
threshold of 2,80 V/cell, the charger shuts down automatically, and the errore
message “V hI" (voltage high) will appear on the display.
USING THE CHARGER
