T-44/48 Series Operation Manual
23
T-44/48 Series | rev.
firm. 1.258 and above
4.1.7 Drive Module Preset
Presets do not change the settings device-wide, such as analog / digital channel
configuration or input routing. Rather, recalling a Module Preset creates a Drive Module by
consuming a number of consecutive outputs and setting up routing between the Input the preset
was recalled on and those outputs. The parameters in that Drive Module are then set according
to the parameters in the components in the Module Preset.
Note:
Module presets only work with consecutive outputs. Modules with non-
consecutive outputs can be created by manually manipulating the routing, and then
recalling
Component Presets
to the individual outputs. The resulting system can then
be stored in a
Snapshot
.
Note:
When a Module Preset Recall consumes outputs to construct a module, it treats a
pair of Bridged outputs as a single channel, so recalling a 2-way Module Preset will
consume 3 output channels if a Bridged pair is encountered.
See
Note:
DSP inputs
“A”
to
“D”
are not the same as physical inputs
“1”
to
“4”
. The T-
44/48 Series has four audio inputs and four DSP inputs. This is a matrix mixing system
where any physical inputs, be they analogue, AES3 or networked audio feeds, can drive
any number of DSP inputs.
4.1.8 Component Preset
A Component Preset represents the processing for just one output. Any part of a
Module Preset may be recalled to any one output. A Drive Module comprised of parameters
which have been recalled to its outputs using Component Preset Recalls can then be saved into
another
Module Preset
provided the outputs remain consecutive (i.e. you have not changed the
routing manually). If the routing has been changed manually, then the whole arrangement may
be saved into a
Also see
Recalling Components
.
4.1.9 Factory Module Preset
The device may contain a library of
Factory Presets
designed to suit Tecnare
loudspeakers.
Factory Presets
may contain some parameters that are fixed and hidden from view; the
remainder of the parameters are available for user manipulation. The number and type of
hidden parameters is dependent on the Factory Preset, typically crossover frequencies, output
delay and some EQs are hidden; those settings that are a function of the loudspeaker cabinet
design and should not require adjustment for different applications.
Factory Presets
are locked
(as indicated by a ‘box’ (
) symbol after the Preset name) so they cannot be over-written. The
user can, however, store an edited version of a Factory Preset in any free preset location.
4.1.10 Key shortcuts
The T-44/48 Series amplifier has key shortcuts to trigger specific functions.
ENT Press
<
ENTER
>
during 5 seconds to lock or unlock the screen.
See Secure Mode
on page 36.
UTIL+ENT Press the key combination
<
UTILITY
>
+
<
ENTER
>
during 5 seconds to flush
the overlay parameters.
See Overlay Flush on page 37.
