TECMIX TMX PRO 1400 DOUBLE, Оригинальное руководство пользователя

Страница: 8 / 21

8
Technical Data (GB)
Electronic Power Mixer
TECHNICAL DATA TMX PRO 1400 DOUBLE
Power Input 1400 W
Voltage 230V/50Hz - 110V/60Hz
Nm 45
Number of Gears 2
No-Load-Speed (min
-1
)
0-480 / 0-680
Ampère (110V) 15,00
Ampère (230V) 7,00
Protection / Class of Protection Double Insulation / II
Certification CE
Thread of fixing the tool 2 x HEX 13
Mixing Paddle (Ø max.) 120 mm
Electronic Speed Control

Net weight 6.9 kg
Control Elements
20 Switch / Arresting pin
21 Gear Switch
16+17 Handle incl. electronic speed control
03
Motor Housing
64 Mixing-Paddles*
65 Spindle holding fixture
* Accessories supplied with the instrument may differ from the parts depicted or described in this
instruction.
Safety Precautions
Safe operation of this machine is only possible when the operating instructions and the safety
precautions are read completely and the instructions contained therein are strictly observed.
o
The machine is not qualified for operation in environments where danger of explosion exits.
o
The machine must not be damp and must not be operated in a wet environment.
o
Always inspect cable and plug before using machine. Only have damage repaired by a
qualified professional.
o
Connect machines that are used in the outside-area via a residual current circuit breaker. Use
only extension cables that are intended for outdoor use and are protected against splash
water.
o
Put the plug into the mains socket only when the machine is switched off.
o
Always lay the cable away from the machine towards the rear.
o
Take care of long hair and fashion accessories; work in properly buttoned-up clothes, without
freely flowing parts.
o
When working with the machine, always hold it firmly with both hands and provide for a
secure stance. Secure the vessel with the mixed substance against moving on the floor.
o
To be on the safe side, always use the handle (16 + 17). Consider possible reaction torque.
o
Do not carry the machine by the power cord.
o
Before any work on the machine itself, pull the mains plug.
If the cord is damaged, it should be replaced by the manufacturer or an authorized service department
to avoid dangers.