7
Clean the outside and inside of the machine cabinet with a damp sponge or cloth
and wipe dry.
Before using the machine for the first time it
’
s better to rinse the inside kettle.
For that :
1. Fill half of the tank of fresh water. (without addendum of any product).
2. Connect the power plug to a wall outlet, the light will illuminate, indicating that
the water begins to warm.
3. When boiling, unplug the device.
4. Raise the kettle with circumspection and empty water in a sink by watching out
not to splash (risk of scald).
5. The apparatus is ready to be used.
USE
Unroll the power cord completely.
Check that the tension in force in the country where you are corresponds to
that indicated on the apparatus.
Connect the apparatus in a correct socket-outlet, (and connected to the ground
if the unit is Class I), to avoid any danger.
Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
Stand the appliance on a table or flat & stable surface.
The item must not be left unattended when it is connected to main supply.
The item is not to be used, if it has been dropped or if there are visible signs of
damage or if it is leaking.
Never modify the appliance in anyway.
This appliance is only intended for household use.
Put the electric charger base on a flat surface.
Fill the kettle with fresh water (without any additives.).
Note : Do not overfill ! Maximum 75% of the tank with fresh water
Close the lid
Place the kettle on the base.
Connect the power plug to a wall outlet, the light will illuminate, indicating that
the water begins to warm.
When boiling, unplug the device.
Take the Kettle and pour genteelly the water in a tea pot or other recipient.
Note : Take care to ovoid any burn.
Do not press up the lid when pouring.
