8
DUAL FLOOR BRUSH
This unit is provided with 2 position brush.
Position 1 : for hard floors
Position2 : for carpets
TO EMPTY & CLEAN THE DUST TANK
1. Disconnect the appliance from the main POWER
2. Open the hatch (under the appliance)
3. Remove the dust filter and clean it (see next paragraph)
4. Empty and clean the dust container.
5. After drying, replace the filter and close the hatch.
TO CLEAN THE FILTER
1. After removing the filter from the vacuum cleaner, remove the
foam filter (when it is dirty).
2. Clean it with water (possibly with a little detergent)
3. Rinse gently thoroughly!
4. Allow it to dry naturally and when it is dry, reassemble it in the
filter and reinsert the filter into the dust compartment.
NOTE: NEVER USE THE VACUUM WITHOUT THE FILTER.
