TechVision PDS5E3WZ-A, Руководство пользователя

Страница: 29 / 49

24
Network Camera User Manual
alarm lines.
Go to Config

Event

Line Crossing interface as shown below.
1. Enable line crossing alarm and set the alarm holding time.
2. Set alarm trigger options. The setup steps are the same as motion detection. Please refer to
motion detection chapter for details.
3. Click “Save” button to save the settings.
4. Set area and sensitivity of the line crossing alarm. Click the “Area and Sensitivity” tab to go
to the interface as shown below.
Set the alarm line number and direction. Only one line can be added. Multiple lines cannot be
added simultaneously.
Direction
：
A<->B, A->B and A<-B optional. This indicates the direction of the intruder who
crosses over the alarm line that would trigger the alarm.
A<->B
: The alarm will be triggered when the intruder crosses over the alarm line from B to A
or from A to B.
A->B
: The alarm will be triggered when the intruder crosses over the alarm line from A to B.
A<-B
: The alarm will be triggered when the intruder crosses over the alarm line from B to A.
Click the “Draw Area” button and then drag the mouse to draw a line in the image. Click the
“Stop Draw” button to stop drawing. Click the “Clear” button to delete the lines. Click the
“Save” button to save the settings.
5. Set the schedule of the line crossing alarm. The setup steps of the schedule are the same as