TechVision PDS5E3WZ-A, Руководство пользователя

Страница: 24 / 49

19
Network Camera User Manual
1. Check “Enable” check box to activate motion based alarms. If unchecked, the camera will
not send out any signals to trigger motion-based recording to the NVR or CMS, even if there is
motion in the video.
Trigger Email
: If “Trigger Email” and “Attach Picture” checkbox are checked (email address
shall be set first in the Email configuration interface), the captured pictures and triggered event
will be sent into those addresses.
Trigger FTP
: If “Trigger FTP” and “Attach Picture” checkbox are checked, the captured
pictures will be sent into FTP server address. Please refer to FTP configuration chapter for more
details.
2. Set motion detection area and sensitivity. Click the “Area and Sensitivity” tab to go to the
interface as shown below.
Move the “Sensitivity” scroll bar to set the sensitivity. Higher sensitivity value means that
motion will be triggered more easily.
Select “Add” and click “Draw”. Drag the mouse to draw the motion detection area;
Select “Erase” and drag the mouse to clear motion detection area.
After that, click “Save” to save the settings.
3. Set the schedule of the motion detection. Click the “Schedule” tab to go to the interface as
shown below.