TechVision PDS5E3WZ-A, Руководство пользователя

Страница: 28 / 49

23
Network Camera User Manual
Go to Config

Event

Exception interface as shown below.
1. Enable the applicable detection that’s desired.
Scene Change Detection
: Alarms will be triggered if the scene of the monitor video has
changed.
Video Blur Detection
: Alarms will be triggered if the video becomes blurry.
2. Set the alarm holding time and alarm trigger options. The setup steps are the same as motion
detection. Please refer to motion detection chapter for details.
3. Click “Save” button to save the settings.
4. Set the sensitivity of the exception detection. Click “Sensitivity” tab to go to the interface as
shown below.
Drag the slider to set the sensitivity value or directly enter the sensitivity value in the textbox.
Click “Save” button to save the settings.
The sensitivity value of Scene Change Detection
: The higher the value is, the more sensitive
the system responds to the amplitude of the scene change.
The sensitivity value of Video Blur Detection
: The higher the value is, the more sensitive
the system responds to the blurriness of the image.
※
The requirements of camera and surrounding area
1. Auto-focusing function should not been enabled for exception detection.
2. Try not to enable exception detection when light changes greatly in the scene.
3. Please contact us for more detailed application scenarios.
4.4.3 Line Crossing
Line Crossing
: Alarms will be triggered if someone or something crosses the pre-defined