5.3 Menu Lock
Considering a system safety feature you can click [
DVR. If you want to login to the DVR again
shown as Picture 5-59
5.4 Split mode
The model displays 4/8 live images in the sequence of single, 4
If you enter into 4-split mode, the live images will be displayed in turn CH1~4, CH5~8…and CH13~16.
If you enter into 9-split mode, the live images will be displayed in turn CH1~9
5.5PTZControl
Click the [ ] icon to enter into [
camera with Pan, Tilt and Zoom capabilities.
Click [Zoom-/+] button to zoom in /
button adjust iris to open or close.
How to set pre-set point
Total:
set up pre-set point quantity
Cur Point:
indicates starting point cruised. System default point is 01. The mod
pre-set points.
Stop time:
sets the stop time at each
GOTO:
allow you go to a specific preset point
Set:
allow you set a set of specific preset points of a PTZ camera.
1. Select a camera you desire to set a
2. Adjust the camera in a desired direction;
3. Click [Set] to set the point as preset point;
4. Click [Save] to save the preset point;
5. Follow the above step to add one more preset point.
Save:
save all the preset points
Clean
: allow you delete one se
Note
: Up to 254pre-sets per one camera can be stored. However, actual preset quantity differs depending
on PTZ performance.
Picture 5-59
26
a system safety feature you can click [ ] icon to lock system interface
login to the DVR again, you would input device code and password
images in the sequence of single, 4-split and 9-split modes.
split mode, the live images will be displayed in turn CH1~4, CH5~8…and CH13~16.
split mode, the live images will be displayed in turn CH1~9
CH10~16.
] icon to enter into [PTZ control] menu shown as Picture5-
camera with Pan, Tilt and Zoom capabilities.
/+] button to zoom in / out the image; Click [Focus -/+] button to focus the image; Click [Iris
quantity
indicates starting point cruised. System default point is 01. The mod
time at each point and range is 1~255;
specific preset point.
llow you set a set of specific preset points of a PTZ camera.
Select a camera you desire to set a preset point;
Adjust the camera in a desired direction;
Click [Set] to set the point as preset point;
Click [Save] to save the preset point;
Follow the above step to add one more preset point.
save all the preset points
: allow you delete one selected preset point.
sets per one camera can be stored. However, actual preset quantity differs depending
Friendly Reminder:
Administrator has full authority
over Main Menu operations and has an authority to
limit common user’s operation.
Picture 5-60
User Manual
system interface when leaving the
password to unlock the interface
split modes.
split mode, the live images will be displayed in turn CH1~4, CH5~8…and CH13~16.
CH10~16.
-60. Now user can control the
/+] button to focus the image; Click [Iris -/+]
indicates starting point cruised. System default point is 01. The model support up to 255
sets per one camera can be stored. However, actual preset quantity differs depending
Administrator has full authority
and has an authority to
