Techtanium MP 20, Инструкция по установке и эксплуатации

Страница: 13 / 20

Tankless Coil Boiler Application - Priority Figure 3a.
1 3
Opera
�
on:
When any thermostat calls for
heat, the boiler is given a signal to start. The
appropriate circulator is energized only when
the boiler temperature is above the low limit.
Priority Opera
�
on:
When Zone 6 is
switched to the priority se
�
ng and is ac
�
vat
‐
ed, all other zones will stop opera
�
on un
�
l
zone 6 is sa
�
s

ed. When Zone 6 is not
switched to priority, all zones will operate
independently.
Jumper Placement:
REMOVE the jumper
between terminals ZC and ZR. Connect termi
‐
nal ZC to ZC terminal on the aquastat control.
Connect terminal ZR to ZR terminal on the
aquastat control. Con

rm polarity is con
‐
sistent between the boiler aquastat and the
switching relay.
Power input:
Connect 120 volt as power
input to terminals N and H. Neutral wire to
terminal N. Hot wire to terminal H.