18
3. Deletion
A Manager can delete User(s) from the Manager Menu. When deleting Users from a slave unit, the
master unit has to be in operation so that the slave unit can access the database of the master unit.
Deleting a User from any unit will automatically remove the User from the database of all units in the
network.
3.1 Delete Installer
It is strongly recommended that a system Manager delete the Installer, who has the same right as a
Manager, once installation is complete. Go to the menu as indicated below to delete the Installer.
If you delete the Installer from the VP-II X, it will delete only the Installer enrolled on that unit which
means Installer’s PIN enrolled in other units in the network will remain. In order to delete all Installer PINs
of every unit in the network at the same time, you should use NetControl-X software.
3.2 Delete Users
Delete User
This function is to delete a single User. Enter the Users
PIN or present the Users card to be deleted. Follow the
steps as displayed to complete deletion.
Only Users can be deleted, Managers cannot be directly
deleted from this menu. In order to delete a Manager, its
User class has to be changed to a User. Please refer to
“Chapter 2 5.1 Edit User” to learn how to change the User
class of a Manager to a User.
Using Card Number
For card Users, normally a card User is deleted by its Wiegand PIN when it is enabled; The VP-II X will
delete a card User by using its card number. To match the card number exactly, VP-II X has to be set to
the proper Wiegand format in the system. Please refer to “Chapter 3 5.1 Wiegand Settings” to learn how
to set a Wiegand format for a card User.
Manager Menu > 1. User Management > 2. Delete User
Manager Menu > 1. User Management > 5. Delete Installer
