17
Personal Security Level using the NetControl-X or in the Manager menu on the VP-II X, see “Chapter 2
5.1Edit User”.
The Level indicates an adjustable
Security Level
for matching vascular biometric data for verification.
Five adjustable levels are provided; level 1 is the strictest in matching the vascular data. Higher level (1)
provides a higher accuracy in matching, but may cause a higher false rejection ratio depending on
individual vascular characteristic and/or environment.
The default factory setting is level 4 which is the recommendation for use during initial implementation to
allow training of Users in the correct positioning and/or placing his/her hand to the scanner. It is
recommended that after successful implementation and training that the System level for the VP-II X be
set at Level 3 or higher. The Personal Security Level can be adjusted for individual Users based on their
specific requirements.
Each VP-II X unit has a security level (System Level), and it can be individually assigned to each User’s
(Personal Security Level). When verifying a User, the VP-II X uses either Personal Security Level if
assigned or System Level if the Personal Security Level is not assigned to the User.
TEST
This function gives the User an opportunity to check if the enrollment has been properly made. If you
execute TEST, it will start a verification process so that the User can perform test verification. In case a
User cannot properly verify, you may re-enrol.
More
This will bring up additional options for enrollment as shown below. This allows the activation of a User
start time and/or expiry time. Select Enable and set the Start Time and/or Expire Time. The User will
not be able to gain access until the Start Time if set. This option also can be set by using NetControl-X
software.
Password
This is an option to enroll a User with only a password, from 4 to 10 digits, without enrolling the vascular
data. If assigned, the User can gain access by only entering the password followed by a PIN or card.
See “Chapter 2 4.2 Password User Verification” for details on how the password Users can gain access.
