17
5m
m
2
0
m
0
m
2
0
5
m
m
2
0
0
m
m
305mm
300mm
11.Install the round doublers to the
pre-reserved holes (4 places) on the
horizontal stabilizer.
12. Insert the wing fence into the
pre-reserved slot of the middle wing and
apply some foam friendly C/A.
13. Bevel the wing strengthen foam.
10. Install the round doublers to the
pre-reserved holes (2 places) on the
horizontal fuselage.
14.Install the round doublers to the
pre-reserved holes (4 places) on the
wing. Please pay attention to the direction
of the slot on the round doubler, see
above picture for reference.
15
.
Install the carbon fiber rods (4pcs) to
strengthen the wing as shown.
16
.
Place the wing strengthen foam
between the two carbon fiber rods.
Note: Please pay attention to the hollow-
carved letters on the wing strengthen
foam. Put the foam right side down.
17
.
Apply some C/A to the round doubler
joints.
18
.
Apply some C/A to all the joints of
carbon fiber rods and the wing strengthen
foam.
19
.
Fix the elevator to the fuselage with
3M magic tape.
20
.
Install other carbon fiber rods.
Finished carbon fiber rods assembly
picture as shown.
21. Install the landing gears.
-
3
-
