Instruction Manual - PH Slimline
Feel good through warmth from electricity - www.technotherm.de
GB
|7
4
_ ._
: Calibration of the internal probe
The calibration must be done after 1 day working with the same setting temperature in
accordance with the following description:
Put a thermometer in the room at 1.5M distance from the floor (like the thermostat) and check
the real temperature in the room after 1 hour.
When you enter on the calibration parameter the actual value is displayed.
To enter the value shown on the thermometer, use the (-) or (+) keys to enter the real value. Then,
press (Ok) to confirm. The logo should be displayed, to inform that a calibration is now made
and saved in the memory. If you need to erase a calibration already made press on the
navigation key left ( ). Then the logo must disappear.
* Pay attention: Only the heating element managed by the thermostat must be used during the
complete step of the calibration.
5
AF
: Anti Freeze temperature:
This Anti-freeze temperature used in Holiday mode.
Adjustable 0.5 to 10.0°C with default value 5.0°C.
6
ITCS
: Intelligent Temperature Control System
The Intelligent Temperature Control System will activate your installation in advance (2 hours
maximum) to assure the desired temperature at the hour programmed following your weekly pro
gram. This automatic control system works in the following way:
When you start your thermostat for the first time, it will measure the time taken by your
installation to reach the set temperature. The thermostat will re-measure this time at each pro
gram change to compensate external temperature change & influence. You can now program
your thermostat without the need to adjust the temperature in advance because your
thermosat does it automatically for you.
7
WIN
: Automatic detection of open windows.
This feature allows detect automatically if you open a window.
No: deactivation of the function.
Yes: Activate the function
8
Clr
: Factory setting
Press and maintain (Ok) key during 10s to reset Set points temperatures and user parameters in
this menu to factory default settings. User programs will also be resetted.
* Pay attention:
Ensure that you have all necessary elements to re-setup your installation before to use this
function.
9 Software version
_._
10
End
: Exit the parameter’s menu
Press (OK) key to exit installation parameter menu and return to normal operation.
