Technosystem 11100088, Руководство пользователя

Страница: 3 / 12

3
The electrical hoister is designed to enable the external unit to be easily and quickly installed even in difficult conditions.
Thanks to the practical fastening knobs, to the 4 wall-levelling feet, to the electric winch complete with control panel, the
Tecnosistemi electrical hoister permits the mounting of external units on KEPLERO SKP, KEPLERO SKP ECO, GIOTTO SG,
CLASSIC TSMC, KEPLERO PALACE AND GIOTTO PALACE brackets.
WARNING
Before performing any hoisting operations, ensure that the hoister is perfectly secured and started
according to the instructions contained in this manual and in the manual supplied with the “PA 200”
electric hoist.
Protective gloves must be worn during installation and during hoisting operations.
Hearing protection devices must be worn during use of the hoist.
Only those straps supplied with the hoist may be used to secure the external unit to the hoisting hook. It is strictly
forbidden to use any other means of anchoring the unit.
The machine must be used in places that are protected from damp, rain and bad weather.
Should there be any likelihood of people crossing the area where the hoist is operating, the potential danger must be
indicated by specific signs.
Loads must never be left unattended during hoisting operations.
This machine is specifically designed to lift condensation units, and must not be used for any other purposes.
WARNING!
The intactness of the machine and all its parts, and the state of wear of the straps, must be checked before
commencing installation operations.
SAFETY WARNINGS
MAINTENANCE AND CONTROLS
INSTALLATION AND COMMISSIONING ELECTRIC HOISTER ON
“GIOTTO” BRACKETS
1. Before securing the Giotto wall bracket, fit two plate nuts into the wall bar’s lateral cut level with the “x” and “y” loops
(see fig. 1).
2. Position the bracket’s shelves in a vertical position inside the arm, in such a way that they do not hinder operations during
the hoisting of the machine (see fig. 4) (In the case of TSMC brackets, do not mount the shelves on the arms).
DESCRIPTION