2.
2.
Advanced Setup
The advanced setup is interpreted for occasions, when the customer wants to change the
current operation mode. The integrated setup wizard helps to carry out some adjustments
easily.
By pressing and holding the SETUP pin on the frontside of your
Replicator
for about 3-5
seconds you call up the setup wizard. A fast flashing control LED indicates switching into
setup mode.
Connect your device with via Wifi with “REPLICATOR”. The network security key is available
on backside of the module. Enter the following IP-address into the URL line of your web
browser: 10.10.1.1
See figure 6.
Figure 6: Replicator Setup
PAGE 8
