2.
2.2.
Setup wizard – Device Info
In this area, the user gets all significant data and information about the module
and the Wifi status.
2.
2.3.
Setup wizard – Firmware Update
In this menu part, it is possible for the user to upload any updates which are
provided by the manufacturer right into the
Replicator
.
If you already downloaded the appropriate update on the manufacturers website,
just click on “firmware update” and then on “Choose file” to choose the right file.
The Upload will start right immediately after pressing the “Update” button.
After updating successfully, the
Replicator
will restart and be ready to use right
afterwards.
Your previously saved settings will not be lost.
3. Connectivity with mobile devices and terminal devices
If you made all necessary adjustments on your
Replicator
, you can now connect it
with your clients and the corresponding apps/software.
How to connect your clients during Server/Client operation mode is already
mentioned in its appropriate chapter.
Connecting your clients and its software to the
Replicator
requires entering the IP-
address 10.10.1.1 and the TCP port 1343 into the using app.
(Die dem Replicator zugewiesene IP-Adresse entnehmen Sie entweder von ihrem WiFi
Router oder im Einrichtungsassistenten des Replicators.)
PAGE 11
