1062 User Guide.doc
1062
Technology Solutions (UK) Limited reserves the right to change its products, specifications and services at any time
without notice. Technology Solutions (UK) Limited provides customer assistance in various technical areas, but does
not have full access to data concerning the uses and applications of any customer’s products. Therefore, Technology
Solutions (UK) Limited assumes no responsibility for customer product design or for infringement of patents and/or
the rights of third parties, which may result from assistance provided by Technology Solutions (UK) Limited. No part
of this document may be reproduced in any form without the written consent of the author.
Page 31 of 39
A typical screenshot is shown below:
When SmartWedge Basic is no longer required switch back to it (Tap on the
icon in ‘Programs’ or ‘Settings>System>Memory>Running Programs’), tap
‘Disconnect’ to close the link to the Handscanner and exit SmartWedge Basic
by tapping ‘Exit.’
If the terminal is put into Suspend state and then resumed the virtual comm.
port is not reopened although SmartWedge Basic will still show ‘Disconnect’
as though the port was open. This is a limitation of Bluetooth Virtual comm.
ports. Tap ‘Disconnect’ and then ‘Connect’ to re-establish the link. The direct
Bluetooth Stack integration included in the advanced version of SmartWedge
handles Bluetooth connection recovery.
