GB 2
ALARM SETTING
Press and hold the
ALARM
button for 2 seconds, the
AL
icon appears on the display, the hour digits flash. Press the
SET/RESET
button to set the desired alarm hours.
Press the
ALARM
button
again, the minute digits flash. Press the
SET/RESET
button to set the desired alarm minutes.
Press the
ALARM
button again to store the alarm settings and return to normal time display. The clock will return to normal mode
in around 30 seconds if no further press of any other buttons.
Turn on or off the alarm
Single press the
SET/RESET
button during normal time display to turn on or off the alarm. When the alarm function is turned on the
icon appears on the display on top of the time digits.
Snooze function
When time reaches the set alarm time, the station will give a beep sound to wake you up. The
icon will flash.
Press the
SNOOZE/CH/REGISTER
button once to stop the alarm temporarily
,
the snooze icon
Zz
keeps flashing. The alarm will
beep again after snooze duration of 6 minutes.
To stop the alarm, press any button except the
SNOOZE/CH/REGISTER
button when alarm is beeping. The snooze icon
Zz
disappears. The alarm will beep again same time next day.
Note:
Alarm duration is approximately 2 minutes.
TEMPERATURE DISPLAYS
The
INDOOR
temperature displays the temperature of the location of the temperature station.
The
OUTDOOR
temperature displays the temperature of the location of the outdoor temperature sensors (outdoor area or another
indoor rooms p.e. cellar, loft, etc.).
Outdoor transmitter reception and signal indicator
After the station is powered up, it starts to search for outdoor transmitter signal. The
icon flashes. To start the reception of
outdoor transmitter signal manually, press and hold the
SNOOZE/CH/REGISTER
button for 2 seconds.
Receiving signal
(
icon flashing)
Successful reception (
icon becomes static)
Failed reception
(
icon disappear)
Press the
SNOOZE/CH/REGISTER
button once to display continually the temperature of only one outdoor sensor (1 channel).
Press the
SNOOZE/CH/REGISTER
button repeatedly to display sequentially the temperatures of all outdoor sensors (channel 1, 2
and 3).
Press the
SNOOZE/CH/REGISTER
button repeatedly until the
icon is shown. The temperature display will switch automatically
between all 3 outdoor sensor channels (channel 1, 2 and 3). Press the
SNOOZE/CH/REGISTER
button to cancel.
°C/°F Display
Press and hold the
SELECT
button for 2 seconds, the temperature display format °C/°F flashes. Press the
SET/RESET
button to
select the °C (Celsius) or °F (Fahrenheit) temperature display format. Press the
SELECT
button again to store the setting.
Temperature trend indicator
The indoor and outdoor temperature trend indicators are updated every 30 minutes. These trend indicators represent the
temperature changes over the past three hours:
Temperature rose more than 1°C (2°F) in the past three hours.
Temperature has not changed more than 1°C (2°F) in the past three hours.
Temperature fell off more than 1°C (2°F) in the past three hours.
