SPIN TRAINER: Service & Maintenance Manual - rev. 2.0
Page 8.2
8.2.
CALIBRATION
The machine incorporates a power CALIBRATION function to ensure that the value shown on the
display corresponds to the actual power produced by the machine.
The various methods for carrying out the CALIBRATION procedure are described in the
“Operating and service instructions” of the machine. In the event of having to performing power
CALIBRATION, it is recommended to follow the procedure below:
1.
Turn on the machine and wait for it to enter standby mode.
2.
Simultaneously press the
314
keys.
3.
The machine will display the message “PSI?” or “ATM?” as a reminder to check the pressure of
the rear tire. After checking the tire pressure, press “Enter”.
4.
The machine will light the LED corresponding to entry of the user’s weight, and “0” will appear
on the display: enter the value 75 Kg, or 165 lbs for US versions.
5.
The entered value will appear on the display.
6.
Press the “Enter” key to confirm or “Clear” to quit the procedure.
7.
If the “Enter” key is pressed, a 5-second beep will indicate that the procedure has been
successfully completed.
8.
The machine is now calibrated.
Содержание spin trainer
