Technogym Skillmill Console, Техническое обслуживание руководство

Страница: 47 / 76

6.3.1 STEPS NECESSARY FOR CONFIGURING THE SKILLMILL
APPLICATION
1. Download the “Equipment set up” APP, available for Android and IOS mobile phones.
Once the APP is downloaded, a tutorial guides the configuration of the Skillmill
to the Wi-Fi network and Unity Self.
2. Check that the customer has installed the Skillmill application on the Unity Self dashboard
using the Technogym app store pro.mywellness.com/store professional application.
3. Set the room in which UNITY SELF is located with the “Equipment set up” app; the room
must be the same where the Skillmill classes are held, that is what is published in the class
calendar of the club pro.mywellness.com/Planner/CalendarClass.
This setting makes it possible for the trainer, once the Skillmill app is opened, to confirm that
the class will be held as scheduled in the class calendar, in order to have all the participation
data of the individual Skillmill classes.
4. Configure Unity Self with a static IP and remember the IP address of unity self because it
must be used in the console configuration.
5. Check that the minimum installation requirements are respected (for details, see the Skillmill
minimum installation requirements document available on TG Direct).
6. Configure the consoles for the WiFi connection and for the connection with UNITY SELF
(setting on the Technogym Equipment Set Up APP plus switching on of the console to store
the data).
7. Assign the virtual number to the Skillmills based on the class layout.
The end customer may carry out this operation autonomously using the Equipment configurator
app.
Skillmill:
Technical Service Guide - Rev. 2.2
Page 47
e-mail: support@technogym.com