Climb Excite
26
Troubleshooting
Problem
Cause
Remedy
Problems in monitoring
heart rate with the chest
band
Other transmitters situated nearby
.
Move the equipment far enough away to stop signal
interference (minimum distance between two units 80 cm).
Strong interference sources nearby.
Find the interference source (e.g. an electrical domestic
appliance) and move it away, or move the equipment.
Worn heart rate monitor chest band
.
Change the chest band.
Chest band transmitter not making proper skin contact
.
Dampen the inside of the chest band with water.
Damaged transmitter
.
Change the chest band.
The steps do not remain
locked in place
The brake is disabled.
Contact the Technogym Technical Support Service.
The product is
permanently in emergency
status, with the steps
locked
The safety sensors are damaged.
Contact the Technogym Technical Support Service.
The safety sensors are blocked.
Remove any obstructions from the sensor zone.