Climb Excite
30
Switching on and off
To turn the the equipment on, switch the main switch to
“I”
(ON) position.
After a quick system check (reset), the equipment is ready for use.
To turn the equipment off, switch the main switch to
“0”
(OFF) position.
The equipment must be switched off only at the end of the exercise, when in standby.
If the equipment isn’t going to be used for a long time, as well as turning it off you should also
pull the plug out of the wall socket.
Warning
The switch is for turning the equipment on and off but does not isolate it
completely from the mains voltage, even in the “0” position (off). For complete
isolation you must unplug the power supply plug.
