Technogym Bike Forma, Руководство по техническому обслуживанию

Страница: 61 / 94

BIKE FORMA: Service & Maintenance Manual - rev. 1.0
Page 7.13
7.12. DISASSEMBLING THE PULLEY
Figure 7.12-1
Carry out the operations described in paragraphs
7.10. “Disassembling the belt” and 7.11.
“Disassembling the pedals and the pedal cranks”.
1. On the left side of the machine, remove the
plastic cover a .
Figure 7.12-2
2. Remove the snap ring b .
Be careful with the various spacer rings
on the pulley shaft.
Figure 7.12-3
3. Remove the pulley c from the opposite side
of the machine.
4. Back off the 3 screws d using a medium
Phillips screwdriver.
5. Remove the plastic cover, not visible in the
photo, from the pulley c .
To reassemble the pulley, carry out the above
steps in reverse order.