BIKE FORMA: Service & Maintenance Manual - rev. 1.0
Page 7.2
7.2. DISASSEMBLING THE CIRCUIT BOARDS ON THE
DISPLAY
Figure 7.2-1
Carry out the procedure described in paragraph
7.1. “Disassembling the display”.
Then place the display on a work bench. It is
now possible to disassemble its five circuit
boards:
•
The 386 board
a
;
•
The CPU board
b
;
•
The CSafe board
c
.
Figure 7.2-2
386 board
a
:
1. Push open the clip fasteners. The 386 board
will lift up.
2. Remove it from the connector on the digital
plan board.
CPU board
b
:
1. Unplug the connectors
g
and
f
.
2. Back off the 4 screws
d
, using a medium
Phillips screwdriver.
3. Back off the 4 screws
e
, using a small
Phillips screwdriver.
4. Remove the circuit board.
CSafe board
c
:
1. Unplug the connector
g
.
2. Remove the circuit board.
Содержание Bike Forma
