Technogym ACTIVE Wellness TV RUN EXCITE, Конфигурация машины

Страница: 19 / 38

ACTIVE WTV: Machine configuration
Press the
ADDRESS
key, insert the desired address and press
ENTER
to confirm and display the
parameter value. Press
BACK
key to back forward.
Press the
VALUE
key, insert the correct value and press
ENTER
to confirm the new parameter
value. Press
BACK
key to back forward.
Although the changes made to the parameters come into effect immediately, they are not
automatically stored in permanent memory; this requires a specific write operation
effected using the command C-0: at address 800 write the value “1”.
To return to the upper menu level press
CLEAR
for a few seconds.
MENU –A–
Par. AddressDescription Value Par. AddressDescription Value
PID mode (700/900) 1 A-59 1218PID min neg err 50
A-0 1200
PID mode (500) 0 A-100 1219Set Linear speed 0
A-1 1201PID ref sel 5 A-101 1220Set Acc Dec 100
A-2 1202PID fbk sel 4 A-102 1221Set Incline ref 0
A-3 1203PID digital ref 0 A-105 1222Def Linear speed 8
A-4 1204PID activat mode 0 A-106 1223Def Acc Dec 100
A-5 1205PID-Encoder sync 1 A-107 1224Def Incline ref 0
A-6 1206PID err sign rev 0 A-110 1225Pulley Ratio 200
A-7 1207PID Integ init en 0 A-111 1226Roller Diameter 91
A-8 1208PID update time 0
A-50 1209PID Prop gain 1
7
A-115 1227
DCMot EncTimeout
(
AT driver SW ≥ 2.07
)
15
A-51 1210PID Int tconst 1 150 A-116 1228Fan command dly 3
A-52 1211PID Deriv gain 1 0 50
A-53 1212PID Prop gain 2 0
A-117 1229ACMot EncToller
0(OFF)
A-54 1213PID Int tconst 2 9999 A-118 1230Check RunnerBand 10
A-55 1214PID Deriv gain 2 0 A-119 1231Check RunnerSpd 50
A-56 1215PID high limit 80 A-120 1232Curr clamp thr 200
A-57 1216PID low limit -80 A-121 1233Check RunnerDly 60
A-58 1217PID max pos err 50
MENU –C–
Par. Address Description Value Par. Address Description Value
C-0 800 Save parameters 0 C-41 805 Save pars to key 0
C-1 801 Recall param 0 C-100 806 Measure stator R 0
C-2 802 Load default 0 C-200 807 Reset AC Flag 0
C-20 803 Alarm clear 0 C-201 808 Reset DC Flag 0
C-40 804 Recall key prog 0
MENU –D–
Par. Address Description Value Par. Address Description Value
D-0 1 Output frequency 0 D-200 26 An in 1 cnf mon 0
D-1 2 Frequency ref 0 D-201 27 An in 1 monitor 0
D-2 3 Output current 0 D-202 28 An in 1 term mon 0
D-3 4 Output voltage 0 D-210 29 An in 2 cnf mon 0
D-4 5 DC link voltage 400 D-211 30 An in 2 monitor 0
D-5 6 Power factor 100 D-212 31 An in 2 term mon 0
D-6 7 Power [kW] 0 D-220 32 An in 3 cnf mon 0
D-7 8 Output speed 0 D-221 33 An in 3 monitor 0
Page 15