Technogel FREEZER 200/1, Инструкция по установке, использованию и обслуживанию

Страница: 13 / 49

13
Correct assembly of the turbine and knives
Before reassembling the turbine, check that the packing gland (1) is correctly mounted:
-
the locking foot (2) on the spring must fit in its seat.
- The rotating part (3) of the packing gland must be free to move along the axle of the turbine (4) with
the force of the spring. If the rotating part (3) of the packing gland is blocked with the spring
crushed, it is necessary to dismantle it by removing it from the axle (4) and to grease the washer
inside using vaseline.
(1)
When re-assembling the turbine in the freezer tube, make sure the scraper knives are mounted correctly.
Correct assembly is as shown below:
INCORRECT
ASSEMBLY
CORRECT
ASSEMBLY
DIRECTION OF
ROTATION
WHEN ASSEMBLING THE TURBINE IN THE MACHINE, BE CAREFUL NOT TO SCRAPE THE
CHROME ON THE OUTSIDE OF THE FREEZER TUBE. ASSEMBLE SLOWLY AND CAREFULLY.