OPERATION
1B
CAUTION
Inproper use of an extension cords can cause of overheating or create
serious fire or shock hazards. Never use worn or damaged cords.
See Table below for recomended extension cord sizes
mm² (AWG)
LENGHT OF CORD
– m. (ft.)
7,5 m.
(25’)
15 m.
(50')
30 m.
(100')
45 m.
(150')
55 m.
(175')
60 m.
(200')
RABBIT
(115V)
1,5 (16)
1,5 (16)
2,5 (14)
4 (12)
6 (10)
6 (10)
RABBIT
(230V)
1,5 (16)
1,5 (16)
1,5 (16)
2,5 (14)
2,5 (14)
2,5 (14)
Table 1.8-1
1.9
Instructions of Use
Be careful to avoid that the flexible Transmission works forming knots or interlacing, also with very
closed bend, this produces premature and unnecessary wearing of the flexible shaft, causing even
their immediate breakage.
Avoid the flexible Transmission being near heat sources, or that it slips to where there are objects with
sharp edges, it must also be protected from heavy machines and other objects which may cause its
deterioration.
The concrete must vibrate in horizontal layers, the needle must never be used to move the concrete
laterally.
With the needle of ø25 mm. (1") the maximum layer to vibrate will be of 15 cm. (6 in.) in thickness,
with the needle of ø38 mm. (1,5") it will be of 20 cm. (8 in.) and with needles of ø48
mm. (1,75”) and
ø60 mm. (2,4") it will be of 30 cm. (12 in.).
The vibrator must NEVER be stopped while it's introduced into the concrete, to stop it must be taken
out of it first.
Protect the electrical cord from heat, oils, grease, objects with sharp edges, heavy objects and other
objects which may cause damaged or rupture.
Always work with the needle totally submerged in the concrete, the refrigeration takes place
by means of the contact with the concrete. Do not make at this way, can produce irreversible
damages in the bearings.
DO NOT allow personnel not capable to make use of the vibrator or manipulate the electric
parts.
ENGLISH
1B-7
