3
4
1. ABOUT THIS MANUAL
This product is equipped with safety features. Nevertheless, read the safety
warnings carefully and use the product only as described in this manual to
avoid injury or damage. Keep this manual for future reference.
Symbols in this manual:
This danger symbol indicates potential injury or handling errors.
This information symbol indicates supplementary information
2. SAFETY WARNINGS
Not following the instructions as set forward in this manual;
makes void any warranty claims or claims for damages to
property and injuries to persons resulting from the use of
this equipment!
Ceveron
MFU 500 must not be used with any other type of power supply as
the one included!
Check safety features of the instrument regularly e.g. for damage to the
housing, vacuum line, etc.
Maintenance or repair must only be performed by a specialist! Do not open
the housing of the instrument, Opening the housing or modifications to or
attempts to repair the instrument will make void any warranty claims.
•
The power supply is delivered with the appropriate plug for your country.
The voltage to be used in connection with Ceveron
®
MFU 500 is preset
to 12 V DC. The correct settings for your country are preset by
Technoclone as is the polarity of the voltage adapter. You must not
change the settings!
•
The respective accident prevention regulations of the Employer and the
respective rules put forward by the respective Liability Insurance
Association for electrical systems and equipment must be observed.
•
In training facilities the handling of power supplies must be supervised
by trained personal.
•
Do not touch the power supply with wet hands and avoid water spillage
of the power supply.
•
Capacitors in the instrument may still be charged even when the
instrument has been disconnected from the power supply.
•
Never plug in the power supply immediately after it has been brought in
from the cold. Formation of condensing water can destroy the unit. Allow
the instrument to reach room temperature before plugging it in.
•
The power supply output connecting cable must not be extended.
•
The Power Supply can become hot during operation. Ensure the device
has sufficient ventilation. Ventilation slots must not be covered!
•
The Power Supply must not be plugged in when the unit shows visible
sings of damage or the unit does no longer function.
Содержание Ceveron MFU 500
Страница 1: ......
