technoac SUCCESS-438.15N, Техническое описание, инструкция по эксплуатации

Страница: 11 / 30

DEVELOPMENT, PRODUCTION, DELIVERY
Detection and locating, measuring equipment, water leak detectors, cable locators, cable and pipe locators
11
12.2.4 «Modes field»
in accordance with the operator choice
shows operating modes under various load
types and different «modulation» options of
the output signal.
1)« » - on / off «ANTENNA» mode and type
of connection of transmitting antenna:
- the lack of the glow – earrings or clamp
are connected to the output (there is no
transmitting antenna);
- green glow – no equipment is connected to the output, internal transmitting inductor is only
operable « In »;
- yellow glow – external induction transmitting antenna « An » is connected to the output.
2) « » -on / off “MODULATION” (special form signal) and type of the special form:
- the lack of the glow – no modulation (continuous signal « Co » of the «regular» sine form);
- green glow – pulse modulation mode « Pu »;
- yellow glow – dual-frequency modulation mode « 2F ».
NOTE
«Modes field» always indicates information about the set operating modes irrespective of
whether oscillation process is running or stopped due to non-use of the red colour (the colour
signifying the «oscillation» mode).
12.2.5 «Digital field»
at the discretion of the operator displays
either numerical parameter value (power
supply voltage « » / signal frequency
«f,кHz» / output voltage «U,V» / load current
«I,A» / load power «Р,W» / load resistance «R,
Ω
/ k
Ω
») or symbolic notation of the mode:
«In» - internal transmitting inductor;
«An» - external induction transmitting antenna;
«Co» - continuous oscillation mode;
«Pu» - pulse modulation mode;
«2F» - dual-frequency modulation mode.
The type of the displaying value in the “Digital field” is defined by the CHOICE button and
indicated by the glow of the relevant indicator in one of the surrounding functional fields.
12.2.6 Control (buttons)
POWER « » by sequenced presses the electrical power
supply of the device can be switched on and off.
CHOICE « » by sequenced presses PARAMETER or MODE
indication can be chosen to be shown in the “Digital field”.
MORE / LESS « » by sequenced presses the parameter
(mode) in the “Digital field” set by the CHOICE button « » can
be decreased / increased (adjusted).
START/STOP « » by sequenced presses the device can be
switched from “stop” to “oscillation” mode and back.