DEVELOPMENT, PRODUCTION, DELIVERY
Detection and locating, measuring equipment, water leak detectors, cable locators, cable and pipe locators
5
3. Operation sequence in passive cable route detection mode
Fig. 3.1
Used equipment:
1.
Connect the electromagnetic sensor and
headphones to the corresponding receiver
connections headphones (if necessary)
3.1 Connection of sensors and check of the receiver operability
2.1
To set the electromagnetic sensor from
transport to operating position. In order to do
that: loosen the locking nut (1), extend the
bar (2) to a required length and fix with the
locking nut
2.2
Loosen the locking nut (1) and install the electromagnetic sensor
(2) in a position used in route detection. Fix the position with the
locking nut. Horizontal position – is used for route detection by
maximum method, and transport position for route detection by
minimum method
3.
Turn on
the receiver
AP-027
electromagnetic
sensor EMD-247
receiver
AP-027
1.
2.
1.
2.
headphones
Содержание SUCCESS-438.15N
Страница 1: ......
